PA2 is a SIP video intercom & Paging device for industry application. The media stream transmission adopts standard IP/RTP/RTSP

protocol. It inherits the advantages of the stability and the sound quality of FANVIL VOIP Phone. It is perfectly compatible with all the

current SIP IPPBX /IMS platforms, such as Asterisk, Broadsoft, 3CX, Elastix, etc. It has various functions and interfaces, Such as Intercom,

broadcast, video , security, recording, to adapt different application environment, you can very easy to DIY your video intercom &

paging equipment. PA2 is the best choice for everyone.

 

Highlights

• Small and exquisite, can be embedded in the internal installation
• Emergency call button interface, active call
• Interact with IPC camera, you can make a video phone call
• NVR video recording, standard RJ45 interface
• Recording output, 3.5mm standard audio interface
• 10W-30W adaptive output power
• System online management and upgrade

Intercome

 Two SIP lines, supporting SIP 2.0

(RFC3261) and related RFC

 Supports two lines RTSP

 Voice broadcast IP address

 Button or remote volume adjustment

 Switch signal input and output

 Talkback recording output

 Handsfree talking

 Default auto answer

 Dynamic multicast function

 Supports DC or POE power supply

 Support for Function key interface

 Support monophonic active speakers

 Network time synchronization

 Action URL / Active URI remote control

 

Audio

 

 Narrowband speech coding: G.711a / u,

G.723.1, G.726-32K, G.729AB

 Broadband speech coding: G.722

 Half Duplex Echo Cancellation (AEC)

 DTMF: In-band, out-of-band DTMF

(RFC2833) / SIP Info

 

 

Networking/ Protocols

 

 Supports PoE (802.3af)

 Primary and secondary DNS servers

are supported

 Support VLAN

 Supports SNTP client

 Support VPN L2TP / PPTP / IPSec

 Supports SRTP

 Support for HTTP / HTTPS web pages

 Support Qos: 802.1p / q, DSCP

 Support MD5 authentication

 Supports Web Filter

 DHCP / static / PPPoE

 STUN

 

 

Physical Specifications

 

 2 RJ45 interface:

Yellow: WAN port 10 / 100M adaptive,

support POE

PoE: 802.3af (Class 3: 6.49 ~ 12.95W)

Black: LAN port (Only connected to the

original camera)

Cable: Super five lines or better

 1 blue indicator (SIP status and

network status)

 2 volume plus or minus key

 1 restore factory settings key

 1 recording output interface:

3.5mm standard audio interface

 1 ground screw

 1 way passive speaker interface:

Output power: 4Ω, POE / 8W, 12V /

10W,18V / 20W, 24V / 30W; related to

supply voltage.

Wire diameter: 18 AWG or larger

diameter

Interface:Pluggable terminal block

 1 headset speaker：

interface:Pluggable terminal block

 1 DSS key interface (4 lines):

Indicator: Positive 5.0V output

Interface:pluggable terminal block

 1 way microphone input interface:

Recommendation: Use an electret

condenser microphone

Sensitivity: -38dB, bias voltage 2.2V

Interface:Pluggable terminal block

 1 short circuit input and output

interface (built-in relay):

Relay: MAX DC30V / 1A, AC125V /

0.5A,

Interface:pluggable terminal block

 2 parallel power input interface:

12V-24V / 2A DC 1 road for the 5.5mm

DC power seat 1 road way 2Pin

pluggable terminal block

 Standby power consumption: to be

determined

 Housing material: aluminum alloy shell

 Installation: Indoor installation

 Operating temperature: -30 ~ 70 ℃

 Storage temperature: -40 ~ 70 ℃

 Relative humidity: 10% - 95%

 Equipment size: 113x83x28mm

 Packing size: 138x108x77mm

 Equipment weight: 250g